Product Description


Product Info

Unit SET
Minorder 1
Supplyability 15 Sets / Month
Payment T/T
Port 40 working days
Certification CE, ISO
Place CHINA
Packaging International wooden case

Product Detail

Product Name:Bump Tester MachinePayload:1000kg
Wave Form:Haf Sine PulseAcceleration Range:5-60 G
Pulse Duration:6-18msBump Repetition Frequency:1-80
Drop Height Range:5-180mmMax Velocity Variation:2.8m/s
Table Size:1500*1500 Mm


ISO Standard Bump Tester Machine For Electronic Products Shock Testing

 

 

Applicable areas

 
Components and other electronic and electrical products may experience repeating impact during transportation or use. Bump test can be used as a method to ensure the design structure is satisfying or as a quality assurance method. Specimen will experience regular peak acceleration and continuous impact with standard pulse during the bump test.

 

 

Speicifications

 

ModelSKM700SKM800SKM1000SKM1500
Table size(mm)700*800800*8001000*10001500*1500
Payload(kg)1002005001000
Wave form                                                Half sine pulse
Acceleration range(G)5-1005-1005-805-60
Pluse duration(ms)                                                     6--18
Bump repetition frequency1-1201-1201-801-80
Drop height range5-120mm5-120mm5-180mm5-180mm
Max velocity variation2.2m/s2.6m/s2.8m/s2.8m/s
Machine dimension(mm)900*900*800900*960*8001200*1150*8601600*1650*1200
Machine weight(kg)1260216036606500
Power & Air supplyAC220V ±10% 50Hz Air supply:8kg 23m3 gasholder
StandardsGB/T2423.4,GB/T2423.6, IEC68-2-29, JJG497-2000, JISC0042-1995 etc

 

 

Packaging & Shipping

 

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case,which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless,moisture corrosion, good transparency etc

 

 

Services


 

Presales:

 

  • Technical consultation: test method, laboratory planning and suggestion.
  • Equipment selection: selection scheme, FAQ.
  • Product testing scheme.

 

In-Sales:

 

  • Customer communication and progress report.
  • Guidance for pre-installation preparation, equipment commissioning and test run.
  • Calibration (when Third Party’s verification is required).

 

After-Sales:

 

  • Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
  • Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
  • Technical support: special paid services are provided according to customer’s needs.

 

 

Factory






Products Categorys

Recommend Products

Navigation