Product Description


Product Info

Unit SET
Minorder 1
Supplyability 50 Sets / Month
Payment T/T, L/C
Port 30 working days
Certification CE, ISO
Place CHINA
Packaging International wooden case

Product Detail

Product Name:Drop Testing MachineSpecimen Weight:85kg
Specimen Dimension:800*800*800mmDrop Mode:Freedom
Machine Dimension:1500*1000*2150mmMachine Weight:480kg
Drop Height:300-1500mm

Packaging Dorp Testing Machine For Product Package Drop Test Meet IEC Requirements
 
 

Product Introduction

 
Packaging drop test is used to determined the effect of impact on the package during use,transportation,loading and unloading. The strictly designed LABTONE “1G+” ensure its accuracy. Apart from accurate plane fall test,it can also perform edge drop and corner drop test to make a complete evaluation on the performance of packaging and product.Lab Drop Tester Machine
 
 

Specifications
 

ModelDT150DT200
Drop Height Range (mm)300-1500300-2000
Specimen Max.Weight (kg)8585
Specimen Max. Size (mm)800*800*800800*800*800
Drop ModeFreedom
Machine Dimension (mm)1500*1000*21501700*1200*2750
Machine Weight (kg)480550
Power SupplyAC220V 50Hz compressed air 0.5~0.7Mpa
StandardsISO2248-72(E) GB/T4857.5 JISZ0202-87 IEC68-2-27

 
 
Features
 

  • Satisfy and even beyond GB, IEC, ASTM, ISTA and other industrial standards;
  • Can perform surfaces, corner and edge drop;
  • Precise guiding system and is driven pneumatically;
  • Unique swing arm structural design, escape acceleration of swing arm detachment greater than 3G;
  • With double column guide, hydraulic buffer absorb the force of the swing arm, the movement is stable, reliable and with low noise;
  • Self-locking screw in lifting mechanism to prevent abnormal detachment of swing arm;
  • Extensible support bracket and bottom slab.

 
FAQ
 

How do you attach the hardware you’re testing to your shaker?
 

By means of a fixture, usually aluminum or magnesium for lightness coupled with rigidity. They can be cast, or smaller fixtures machined from solid stock. Most fixtures are welded.
 

How do you control shakers?
 

If we’re looking for resonances in the product we’re testing, we command the shaker to shake the product at one frequency at a time but to vary that test frequency, to sweep it over a range of frequencies.But more realistically, we command the shaker to vibrate randomly and to excite all the resonances simultaneously.Control commands go into the keyboard of a specially-programmed computer.
 

What are those resonances?Are they bad?
 

Have you ever noticed the steering wheel moving with rather large displacement amplitude, larger than the input to the column? That magnification is called resonance. Possibly it annoys you. There’s a slight chance that in a few years that whipping of the steering column might cause bending fatigue failure.When we shake an automotive or ship or land vehicle instrument, we're looking for, for example, portions of printed wiring boards (PWBs) responding with greater motion than we're inputting. That flexing may damage PWB wiring, it may damage the attached components, and it will damage the soldered connections between components and the PWB.
 
Packaging & Shipping

 

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case,which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless,moisture corrosion, good transparency etc


Products Categorys

Recommend Products

Navigation