Product Description

Bump test systems for electrical products repeating impact testing during transportation

Product Info

Unit set
Minorder 1
Supplyability 30 sets/month
Payment T/T,L/C
Port 30 working days after payment
Certification ISO,CE
Place Dongguan
Packaging international standard wooden case

Product Detail

Bump test systems for electrical products repeating impact testing during transportation



Product Introduction


Components and other electronic and electrical products may experience repeating impact during transportation or use. Bump test can be used as a method to ensure the design structure is satisfying or as a quality assurance method. Specimen will experience regular peak acceleration and continuous impact with standard pulse during the bump test.



Specifications


ModelSKM500SKM700SKM800SKM1000
Table size(mm)500*700700*800800*8001000*1000
Payload(kg)50100200500
Wave form                                                Half sine pulse
Acceleration range(G)5-1205-1005-1005-80
Pluse duration(ms)                                                     6--18
Bump repetition frequency1-1201-1201-1201-80
Drop height range5-120mm5-120mm5-120mm5-180mm
Max velocity variation2.2m/s2.2m/s2.6m/s2.8m/s
Machine dimension(mm)750*660*800900*900*800900*960*8001200*1150*860
Machine weight(kg)1000126021603660
Power & Air supplyAC220V ±10% 50Hz Air supply:8kg 23m3 gasholder
StandardsGB/T2423.4,GB/T2423.6, IEC68-2-29, JJG497-2000, JISC0042-1995 etc



Packaging & Shipping


Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case,which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless,moisture corrosion, good transparency etc



Services


Pre-sales:


  • Technical consultation: test method, laboratory planning and suggestion.
  • Equipment selection: selection scheme, FAQ.
  • Product testing scheme.


In-Sales:


  • Customer communication and progress report.
  • Guidance for pre-installation preparation, equipment commissioning and test run.
  • Calibration (when Third Party’s verification is required).


After-Sales:


  • Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
  • Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
  • Technical support: special paid services are provided according to customer’s needs.



Details


Products Categorys

Recommend Products

Navigation